Thomas from Monroe Township, NJ has been a Green Sun Energy Services client since September of 2021. The generator was commissioned the following April – the survey, the permit and the gas request all sit ahead of the machine arriving, which is the ordinary shape of a standby order. It is rated 17 kW on natural gas against a load calculation asking for 14 kW, and it carries the whole house on a 200-amp service, the sump pump included. Our top-tier service plan goes with it: an annual visit, an extended parts-and-labor warranty and remote monitoring we manage directly.
Project Facts
- Location
- Monroe Township, NJ
- Services
- Standby Generator Installation, Standby Generator Service
- Client since
- September 2021
- Manufacturer
- Generac Model # 7228
- Rated output
- 18 kW LP / 17 kW NG
- Fuel
- Natural Gas
- Electrical service
- 200 amp
- Transfer switch
- 200 amp
- Load management
- Managed Whole House
Standby generator questions from Monroe Township homeowners
Will a 22 kW generator run an entire Monroe Township house?
For many homes, yes, but that does not mean every load can run at the same moment. Houses with two central air conditioners, electric heat, EV charging, pool equipment or electric cooking may need load management or a larger machine. The answer comes from a load calculation rather than from the phrase whole house.
How is the gas pipe size worked out?
From the generator's demand, the available pressure, the pipe length, the allowable pressure drop, the fittings, the pipe material and every other appliance connected to the system. The adopted fuel-gas code carries the sizing requirements and tables, and the model's published fuel consumption goes into the calculation.
Does a 200-amp service need a 200-amp transfer switch?
A transfer switch installed in the service path has to be rated appropriately for the service and the configuration. A 200-amp service commonly uses a 200-amp service-rated switch, but the actual design is confirmed by the electrician rather than assumed from the service size.