Ron and Linda from Tinton Falls, NJ have been Green Sun Energy Services clients since August of 2020. The machine is a Generac 7042-2 rated 22 kW on propane and 19.5 kW on natural gas, running on natural gas, on a 150-amp transfer switch, and it was commissioned in March of 2021. The house is about 2,900 square feet. Green Sun has serviced it every year since – January of 2022, February of 2023, March of 2024, February of 2025 and February of 2026 – and it reports to remote monitoring in between, so a fault announces itself rather than waiting to be found.
Project Facts
- Location
- Tinton Falls, NJ
- Services
- Standby Generator Installation, Standby Generator Service
- Client since
- August 2020
- Manufacturer
- Generac Model # 7042-2
- Rated output
- 22 kW LP / 19.5 kW NG
- Fuel
- Natural Gas
- Electrical service
- 150 amp
- Transfer switch
- 150 amp
- Load management
- Managed Whole House
Standby generator questions from Tinton Falls homeowners
Why do outages last longer on some Tinton Falls streets than others?
Mature tree cover over overhead lines is the usual reason. Limbs coming down in wind, snow or ice take the lines with them, so heavily treed streets tend to see both more frequent outages and longer restoration times than open ones. It is one of the honest arguments for standby power rather than a portable generator.
How can a whole house be carried on a smaller electrical service?
Through load management. One or more large loads are controlled so they do not start at the same moment, or shut down briefly if generator demand climbs too high. That is what allows whole-house coverage where the raw sum of every connected load would otherwise exceed the machine.
Does the generator need its own gas shutoff?
The fuel installation has to include the shutoff arrangements required by the adopted fuel-gas code and by the installation instructions. The valve must be positioned where it is accessible, both for servicing and for isolating the machine in an emergency.