Standby Generator Installation and Standby Generator Service in Bayville, NJ by Green Sun Energy Services.
Diane from Bayville, NJ has been a Green Sun Energy Services client since June of 2023. The generator was commissioned that August: 18 kW on natural gas, on a 150-amp service-entrance switch with a smart management module and surge protection. The load calculation asked for 14 kW across the 1,900 square foot house, and the well pump is the item that changes what an outage means – a house on a well has no water at all once the power stops, which puts backup in a different category from keeping the lights on. A refrigerator, a separate freezer, a washer, a gas dryer and a dishwasher fill out the load. The generator is supported by annual maintenance, a seven-year extended parts-and-labor warranty, and monitoring we manage.
Project Facts
- Location
- Bayville, NJ
- Services
- Standby Generator Installation, Standby Generator Service
- Client since
- June 2023
- Manufacturer
- Generac Model # 7226
- Rated output
- 18 kW LP / 17 kW NG
- Fuel
- Natural Gas
- Home sized for
- 1,900 sq ft
- Electrical service
- 150 amp
- Transfer switch
- 150 amp
- Load management
- Managed Whole House
Standby generator questions from Bayville homeowners
Does the residential building code apply to a generator?
It can. For applicable one- and two-family dwellings New Jersey adopts the 2024 International Residential Code, subject to state amendments. Structural and flood-related generator installations may therefore need review under the residential subcode as well as the electrical and fuel requirements.
How can a whole house be carried on a smaller electrical service?
Through load management. One or more large loads are controlled so they do not start at the same moment, or shut down briefly if generator demand climbs too high. That is what allows whole-house coverage where the raw sum of every connected load would otherwise exceed the machine.
Does the generator need its own gas shutoff?
The fuel installation has to include the shutoff arrangements required by the adopted fuel-gas code and by the installation instructions. The valve must be positioned where it is accessible, both for servicing and for isolating the machine in an emergency.