Anatoly from Monmouth Junction, NJ has been a Green Sun Energy Services client since June of 2021. The generator was commissioned in January of 2022: a 24 kW machine on natural gas, on a 150-amp service-entrance switch. The load calculation asked for 14 kW across the 2,500 square foot house, so the machine carries a margin of ten kilowatts over the requirement – among the widest on the site. A generator working well inside its rating runs cooler, wears its parts more slowly and holds a steadier output when several things start together, which is what a household is buying when it specifies above the calculation rather than at it. Annual maintenance, an extended parts-and-labor warranty and monitoring we manage all sit behind it.
Project Facts
- Location
- Monmouth Junction, NJ
- Services
- Standby Generator Installation, Standby Generator Service
- Client since
- June 2021
- Manufacturer
- Generac Model # 7209
- Rated output
- 24 kW LP / 21 kW NG
- Fuel
- Natural Gas
- Home sized for
- 2,500 sq ft
- Electrical service
- 150 amp
- Transfer switch
- 150 amp
- Load management
- Managed Whole House
Standby generator questions from Monmouth Junction homeowners
Does a generator keep the well running during an outage in Monmouth Junction?
Yes, when the well pump is included in the design. A private well pump is electric, so without power there is no running water at all -- a different order of problem from losing the lights. Homes on a well are among the clearest cases for standby power, and the pump belongs on the load list from the start.
Can the generator stay connected during a pressure test?
The machine has to be protected from test pressures beyond what its fuel controls are built to withstand. The fuel-gas code sets out when appliances are disconnected or isolated for testing, and the plumbing contractor follows both that code and the generator's installation instructions.
Can a generator be converted from propane to natural gas later?
Many air-cooled models can be configured for either fuel, but the conversion has to follow the exact procedure for that model. The new natural-gas supply then has to be properly sized and pressure-tested for the generator before it is put into service.