Edward from Farmingdale, NJ has been a Green Sun Energy Services client since November of 2017. He signed at the end of November and the generator was commissioned at the end of January, a 16 kW Generac in an aluminium enclosure on its own pad behind a 200-amp service-rated switch with a power management module. It covers 2,600 square feet with a refrigerator, an electric oven, a dishwasher and the laundry. A PowerBase plan has covered it since. Farmingdale is in Monmouth County.
Project Facts
- Location
- Farmingdale, NJ
- Services
- Standby Generator Installation, Standby Generator Service
- Client since
- November 2017
- Manufacturer
- Generac Model # 7037
- Rated output
- 16 kW LP / 16 kW NG
- Fuel
- Natural Gas
- Home sized for
- 2,600 sq ft
- Electrical service
- 200 amp
- Transfer switch
- 200 amp
- Load management
- Managed Whole House
Standby generator questions from Farmingdale homeowners
What is a service-entrance-rated transfer switch?
One that is listed for use as service equipment when installed in the appropriate configuration. These are commonly used for whole-house systems, where the transfer switch becomes part of the home's service arrangement rather than sitting downstream of it.
Which way should the generator face?
Orientation has to comply with the installation instructions and must not create an unsafe exhaust or carbon-monoxide condition. Windows, doors, soffit openings, intake vents, window wells and mechanical fresh-air intakes all bear on it. Which way the machine faces is part of the site design, not an aesthetic choice made at the end.
Does a generator in Farmingdale have to sit twelve inches above the flood elevation?
That figure should not be treated as a universal rule without looking at the actual property. The required elevation can depend on the flood-zone designation, the municipal freeboard, the Design Flood Elevation, Coastal A or V Zone conditions, NJDEP requirements and the applicable building-code provisions. Each flood-zone installation is worked out individually.