James from Lincroft, NJ has been a Green Sun Energy Services client since July of 2021. His 22 kW Generac from the 7000 series runs on Gold with a ten year term, which pairs the annual service with extended parts and labor coverage. That matters because Generac factory warranty narrows sharply after year two and covers almost nothing by year five, so ten years of full coverage removes the part of generator ownership that usually bites. Lincroft is in Monmouth County.
Why James chose Green Sun Energy Services
We keep your generator ready before the power goes out.
What makes Green Sun Energy Services different
- Standby generators: installed and serviced as a Generac Authorized Sales and Service Dealer, by factory-authorized Generac technicians. On this home: a standby generator serviced by Green Sun Energy Services.
- Local: locally owned and operated in New Jersey since 2010, NJHIC licensed (#13VH06229000), with 700 completed generator service projects across Monmouth County and 925 generator service projects throughout New Jersey.
Our work in Lincroft
Green Sun Energy Services has completed 36 generator service customers in Lincroft. Lincroft, a community in Middletown Township, is served by JCP&L.
Thinking about generator service for your Lincroft home? Tell us about your project here or call 732-410-7818.
Power it. Protect it. Maintain it.
Project Facts
- Location
- Lincroft, NJ
- Service
- Standby Generator Service
- Client since
- July 2021
- Manufacturer & model
- Generac 7043
- Rated output
- 22 kW LP / 19.5 kW NG
- Fuel
- Natural Gas
- Transfer switch
- 100 amp
- Load management
- Managed Whole House
Standby generator questions from Lincroft homeowners
Does a standby generator need a permit in Lincroft?
A permanently installed generator normally requires New Jersey Uniform Construction Code permits, because it involves permanent electrical and fuel work. Depending on the property and the municipality, building, zoning, floodplain, utility or fire-code review can also apply.
Can the generator be connected to any nearby gas pipe?
No. The branch supplying the generator has to be sized for the flow and pressure the machine needs. A pipe that happens to be close by may be too small, or may already be carrying too much load. Undersized piping shows up as poor starting, unstable running, reduced output or a generator that shuts down under load.
Is an emergency shutdown required?
The 2023 National Electrical Code contains requirements addressing emergency shutdown of generator prime movers. Whether and how they apply is determined from the generator's rating, its location, the model and the installation, and the factory equipment is evaluated against them rather than presumed to comply.