Tamra and Brian from Red Bank, NJ have been Green Sun Energy Services clients since September of 2020. The machine is a Generac 7039-1 rated 20 kW on propane and 18 kW on natural gas, running on natural gas, on a 200-amp transfer switch, and it was commissioned in March of 2021. At about 2,500 square feet with a service-sized switch, the panel transfers as it stands. Green Sun has serviced it in September of 2021, January of 2022, January of 2023, January of 2024 and December of 2024, and it reports to remote monitoring in between.
Project Facts
- Location
- Red Bank, NJ
- Services
- Standby Generator Installation, Standby Generator Service
- Client since
- September 2020
- Manufacturer
- Generac Model # 7039-1
- Rated output
- 20 kW LP / 18 kW NG
- Fuel
- Natural Gas
- Home sized for
- 2,500 sq ft
- Electrical service
- 200 amp
- Transfer switch
- 200 amp
- Load management
- Managed Whole House
Standby generator questions from Red Bank homeowners
Does a propane generator need permits in Red Bank?
A permanently installed propane generator normally requires construction permits, and the propane installation has to satisfy the applicable fuel-gas and LP-gas requirements. Tank placement, capacity, piping, regulators, setbacks and fire-safety provisions all come under review.
What is a sediment trap for?
It helps stop foreign material in the gas line from reaching the generator's fuel controls. Where the fuel-gas code and the system configuration call for one, it is fitted, and the maintenance schedule includes inspecting or cleaning it.
Does the generator start on its own?
Yes. A properly installed standby generator left in AUTO is designed to start automatically when it detects an unacceptable loss of utility power. The transfer system then moves the household loads across, and when acceptable utility power returns it transfers them back and the generator runs through its programmed shutdown.