Standby Generator Service in Farmingdale, NJ by Green Sun Energy Services.
Rosemary from Farmingdale, NJ has been a Green Sun Energy Services client since July of 2025. The Generac 7226 at the house is rated 18 kW on propane and 17 kW on natural gas, runs on natural gas, and feeds an 80-amp transfer switch. It was installed in August of 2024 by another company, and Green Sun serviced it in August of 2025. Taking on a machine barely a year old is the easiest version of this job – nothing has been left long enough to need putting right before the annual cycle can start – and it reports to remote monitoring in between visits.
Project Facts
- Location
- Farmingdale, NJ
- Service
- Standby Generator Service
- Client since
- July 2025
- Manufacturer
- Generac Model # 7226
- Rated output
- 18 kW LP / 17 kW NG
- Fuel
- Natural Gas
- Electrical service
- 150 amp
- Transfer switch
- 80 amp
- Load management
- Whole House
Standby generator questions from Farmingdale homeowners
Does a standby generator need a permit in Farmingdale?
A permanently installed generator normally requires New Jersey Uniform Construction Code permits, because it involves permanent electrical and fuel work. Depending on the property and the municipality, building, zoning, floodplain, utility or fire-code review can also apply.
How is the gas pipe size worked out?
From the generator's demand, the available pressure, the pipe length, the allowable pressure drop, the fittings, the pipe material and every other appliance connected to the system. The adopted fuel-gas code carries the sizing requirements and tables, and the model's published fuel consumption goes into the calculation.
Does a 200-amp service need a 200-amp transfer switch?
A transfer switch installed in the service path has to be rated appropriately for the service and the configuration. A 200-amp service commonly uses a 200-amp service-rated switch, but the actual design is confirmed by the electrician rather than assumed from the service size.