Karen from Union, NJ has been a Green Sun Energy Services client since June of 2021. The Generac 7030 at the house is rated 9 kW on propane and 8 kW on natural gas, runs on natural gas, and feeds a 40-amp transfer switch. It was installed in January of 2017 by another company, and Green Sun serviced it in June of 2021. Nine kilowatts on a 40-amp switch is an essential-circuits installation and reads as one: a chosen group of circuits, sized so the machine can hold them without argument.
Project Facts
- Location
- Union, NJ
- Service
- Standby Generator Service
- Client since
- June 2021
- Manufacturer
- Generac Model # 7030
- Rated output
- 9 kW LP / 8 kW NG
- Fuel
- Natural Gas
- Transfer switch
- 40 amp
- Load management
- Dedicated (Essential) Circuits
Standby generator questions from Union homeowners
Does new gas piping have to be pressure tested in Union?
Yes. Gas piping subject to the adopted fuel-gas code must be inspected and tested before it is accepted. New Jersey adopts the 2024 International Fuel Gas Code, which governs the inspection, the test pressure and how long the test has to hold.
How often should a standby generator be serviced?
Maintenance follows the schedule for the exact model and its operating hours. For current air-cooled units that means an annual inspection plus scheduled work at hour-and-year intervals. Extended running during a long outage can bring the next service forward.
Does the generator have to be bolted down?
Not every ground-level installation uses the same anchoring method. The requirement changes with the model, the pad type, wind exposure, flood requirements, elevated platforms and any local engineering requirement. The model manual and the site conditions decide it.