18 kW Standby Generator Installation in Holmdel, NJ | Generac Generator

Holmdel, NJ · Client since April 2022

Nicholas from Holmdel, NJ has been a Green Sun Energy Services client since April of 2022. The generator was commissioned in June: 17 kW on natural gas, on a 200-amp managed whole-house switch with a smart management module and surge protection, sized against a 15 kW calculation for the 2,700 square foot house. A double electric oven and a mini-split are the two loads doing most of the work in that figure – the oven draws hard at predictable times, and the mini-split draws several times its running load in the instant the compressor starts. The management module exists so the two never start together. Annual maintenance, an extended parts-and-labor warranty and monitoring we manage all sit behind the machine.

Project Facts

Location
Holmdel, NJ
Services
Standby Generator Installation, Standby Generator Service
Client since
April 2022
Manufacturer
Generac Model # 7226
Rated output
18 kW LP / 17 kW NG
Fuel
Natural Gas
Home sized for
2,700 sq ft
Electrical service
200 amp
Transfer switch
200 amp
Load management
Managed Whole House

Standby generator questions from Holmdel homeowners

How quickly does it take over?

The automatic start sequence normally begins within seconds of the controller deciding that utility power has failed or fallen outside acceptable limits. There is a deliberate short delay so that a momentary flicker does not trigger a full start and transfer. Exact timing depends on the controller, the transfer switch and the configuration.

Why do outages last longer on some Holmdel streets than others?

Mature tree cover over overhead lines is the usual reason. Limbs coming down in wind, snow or ice take the lines with them, so heavily treed streets tend to see both more frequent outages and longer restoration times than open ones. It is one of the honest arguments for standby power rather than a portable generator.

Does new gas piping have to be pressure tested in Holmdel?

Yes. Gas piping subject to the adopted fuel-gas code must be inspected and tested before it is accepted. New Jersey adopts the 2024 International Fuel Gas Code, which governs the inspection, the test pressure and how long the test has to hold.

Scroll to Top