Al from Middletown, NJ has been a Green Sun Energy Services client since June of 2022. A Generac Guardian rated 18 kW on propane and 17 kW on natural gas went in that August, running on natural gas behind a 200-amp automatic transfer switch, with 2,223 square feet of living space behind it on the load survey. The switch is sized to the service rather than to a selected group of circuits, so nothing about the house has to change when the power does.
Project Facts
- Location
- Middletown, NJ
- Services
- Standby Generator Installation, Standby Generator Service
- Client since
- June 2022
- Manufacturer
- Generac Model # 7226
- Rated output
- 18 kW LP / 17 kW NG
- Fuel
- Natural Gas
- Home sized for
- 2,223 sq ft
- Electrical service
- 200 amp
- Transfer switch
- 200 amp
- Load management
- Managed Whole House
Standby generator questions from Middletown homeowners
Can the existing natural-gas service in a Middletown home supply a generator?
Often yes, but the gas system has to be evaluated first. The review covers the generator's BTU demand, meter capacity, available pressure, regulator capacity, pipe diameter and length, and every other gas appliance in the house -- furnace, boiler, water heater, range and fireplace among them.
What size standby generator does a Middletown home need?
The correct size is decided by the electrical loads the generator is expected to run, not by the square footage of the house. Central air, heat pumps, electric heat, well and sump pumps, refrigerators and freezers, electric ranges and dryers, pool equipment and EV chargers all count. Where a load is connected automatically, the generator either has the capacity for it or an approved load-management system controls it.
Can the platform height be read off the FEMA flood map?
Not necessarily. The map matters, but it may not carry every elevation the platform design needs. An Elevation Certificate, a surveyed ground elevation, the Base Flood Elevation, the Design Flood Elevation, the local freeboard and the municipal flood ordinance can all bear on it, so the height is calculated for the specific property.
