Josh from Belford, NJ has been a Green Sun Energy Services client since November of 2019. The generator was installed by another company and commissioned in January of 2015, and the servicing came to us nearly five years later. The first visit was not a routine one: the machine would start and then stop again after about thirty seconds, which is the classic sign of a fault that a weekly self-test will never reveal and an outage certainly will. It was put right, and the intervals have been kept since – the five-year, 1,000-hour and subsequent services following in the years after. An annual maintenance plan and an extended parts-and-labor warranty both sit behind the machine now.
Why Josh chose Green Sun Energy Services
We keep your generator ready before the power goes out.
What makes Green Sun Energy Services different
- Standby generators: installed and serviced as a Generac Authorized Sales and Service Dealer, by factory-authorized Generac technicians. On this home: a standby generator serviced by Green Sun Energy Services.
- Local: locally owned and operated in New Jersey since 2010, NJHIC licensed (#13VH06229000), with 707 completed generator service projects across Monmouth County and 934 generator service projects throughout New Jersey.
Our work in Belford
Green Sun Energy Services has completed 16 generator service customers in Belford. Belford, a community in Middletown Township, on Sandy Hook Bay, is served by JCP&L.
Thinking about generator service for your Belford home? Tell us about your project here or call 732-410-7818.
Power it. Protect it. Maintain it.
Project Facts
- Location
- Belford, NJ
- Service
- Standby Generator Service
- Client since
- November 2019
- Manufacturer & model
- Generac 6459
- Rated output
- 16 kW LP / 16 kW NG
- Fuel
- Natural Gas
- Transfer switch
- 65 amp
- Load management
- Whole House
Standby generator questions from Belford homeowners
Can the generator be connected to any nearby gas pipe?
No. The branch supplying the generator has to be sized for the flow and pressure the machine needs. A pipe that happens to be close by may be too small, or may already be carrying too much load. Undersized piping shows up as poor starting, unstable running, reduced output or a generator that shuts down under load.
Can a generator be installed in a flood zone in Belford?
Yes, but the generator and its electrical equipment may need to be elevated or otherwise protected. The installation is evaluated against the property's FEMA flood zone, its Base Flood Elevation and Design Flood Elevation, the municipal flood ordinance, any applicable freeboard, and NJDEP requirements where they apply. It is a property-by-property assessment rather than a rule of thumb.
Why can't a generator be wired straight into the panel?
Because a standby generator needs approved transfer or interconnection equipment so that it cannot unintentionally energise the utility supply. The transfer switch is one of the most important electrical-safety components in the whole installation, not an accessory to it.