Generac 16 kW Standby Generator in Holmdel, NJ | 2,700 Sq. Ft. Covered

Holmdel, NJ · Client since May 2018

Brad from Holmdel, NJ has been a Green Sun Energy Services client since May of 2018. He signed at the start of May and the generator was commissioned in the middle of July, a 16 kW Generac in an aluminium enclosure on its own pad behind a 150-amp service-rated switch. It covers 2,700 square feet with two refrigerators, a dishwasher and the laundry. A PowerBase plan has kept it serviced since. Holmdel is in Monmouth County.

Project Facts

Location
Holmdel, NJ
Services
Standby Generator Installation, Standby Generator Service
Client since
May 2018
Manufacturer
Generac Model # 7035
Rated output
16 kW LP / 16 kW NG
Fuel
Natural Gas
Home sized for
2,700 sq ft
Electrical service
150 amp
Transfer switch
150 amp
Load management
Managed Whole House

Standby generator questions from Holmdel homeowners

What should a Holmdel homeowner look for in a generator installer?

A contractor who can design, permit, install, commission, maintain and repair the whole system rather than one who sells the machine. That means generator sizing and transfer equipment, disconnect and shutdown requirements, grounding and bonding, the manufacturer's own installation requirements, gas or propane capacity and pressure, the model-specific clearances, the municipal zoning setbacks, windows and vents and carbon-monoxide entry points, flood requirements where they apply, permits and inspections, utility coordination, load management, commissioning, warranty registration, monitoring and long-term service. The lowest proposal is not necessarily the lowest cost over the life of the system.

Do underground utilities have to be marked before the trench is dug?

Yes. Underground facilities must be addressed through the New Jersey One Call process before the excavation begins, which is what protects buried gas, electric, telecommunications and water lines from being struck.

Can a standby generator run central air conditioning?

Yes, when it is sized for it. The design has to account for both the running demand and the starting surge of the air-conditioning equipment. Load-management equipment can be used where necessary so that demand does not all arrive at once.

Scroll to Top