Generac 20 kW Standby Generator in Farmingdale, NJ | Two Ovens, Two Refrigerators

20 kW Generac standby generator in Farmingdale, NJ
20 kW Generac standby generator in Farmingdale, NJ by Green Sun Energy Services.

Farmingdale, NJ · Client since December 2012

Richard from Farmingdale, NJ has been a Green Sun Energy Services client since December of 2012. He signed in mid December and the generator was commissioned at the start of May, a 20 kW Generac behind a 200-amp service-rated transfer switch with a five year warranty. The house is 2,200 square feet carrying two electric ovens, two refrigerators, a dishwasher and the laundry, and at 20 kW none of it has to be switched off or prioritised. Farmingdale is in Monmouth County.

Project Facts

Location
Farmingdale, NJ
Services
Standby Generator Installation, Standby Generator Service
Client since
December 2012
Manufacturer
Generac Model # 6244
Rated output
20 kW LP / 18 kW NG
Fuel
Natural Gas
Home sized for
2,200 sq ft
Transfer switch
0 amp
Load management
Managed Whole House

Standby generator questions from Farmingdale homeowners

How far from the property line does a generator need to be in Farmingdale?

There is no single statewide New Jersey property-line setback for a residential generator. Setbacks are set by the municipality's zoning ordinance, so the requirement is a Farmingdale question rather than a general one. A generator can meet every manufacturer clearance and still breach a side-yard or rear-yard setback, which is why the zoning review happens before the location is fixed.

Does a generator produce less on natural gas than on propane?

Some models do have a lower rated maximum output on natural gas than on propane -- a current 22 kW machine is rated 22 kW on LP and 21 kW on natural gas. Other models carry their own ratings, so the model-specific specification sheet is what settles it rather than a general rule.

Does the generator need its own gas shutoff?

The fuel installation has to include the shutoff arrangements required by the adopted fuel-gas code and by the installation instructions. The valve must be positioned where it is accessible, both for servicing and for isolating the machine in an emergency.

Scroll to Top