Suzanne from Long Branch, NJ has been a Green Sun Energy Services client since February of 2019. Her 11 kW Generac from the 6400 series sits on our Gold plan with a ten year term, which is a long commitment on a modest unit and exactly the right one: the smaller generators are the ones people forget about. Gold covers the scheduled maintenance and the parts across that decade. Long Branch is in Monmouth County, on the ocean, where outages arrive with the weather rather than by surprise.
Project Facts
- Location
- Long Branch, NJ
- Service
- Standby Generator Service
- Client since
- February 2019
- Manufacturer
- Generac Model # 6438
- Rated output
- 11 kW LP / 10 kW NG
- Transfer switch
- 50 amp
- Load management
- Managed Whole House
5-Star google review
Green Sun Energy Services replied
Thank you, Suzanne. The 11 kW Generac at your home in Long Branch has been with us since 2019 and serviced every year since, so it is ready rather than merely installed. A machine that size covers the essentials of a house comfortably, and keeping it on a schedule is what turns equipment into peace of mind.
Standby generator questions from Long Branch homeowners
Can a standby generator be installed in Long Branch without natural gas?
Yes. Residential standby generators commonly run on liquid propane. A properly sized tank, regulator and piping system has to be designed to deliver adequate vapour flow and pressure for the machine.
Which way should the generator face?
Orientation has to comply with the installation instructions and must not create an unsafe exhaust or carbon-monoxide condition. Windows, doors, soffit openings, intake vents, window wells and mechanical fresh-air intakes all bear on it. Which way the machine faces is part of the site design, not an aesthetic choice made at the end.
How quickly does it take over?
The automatic start sequence normally begins within seconds of the controller deciding that utility power has failed or fallen outside acceptable limits. There is a deliberate short delay so that a momentary flicker does not trigger a full start and transfer. Exact timing depends on the controller, the transfer switch and the configuration.