Green Sun Energy Services, LLC has worked for 5 clients in Parlin between 2014 and 2020 — Standby Generator Installation and Standby Generator Service. Every one of those jobs is shown below, with the photographs taken on it.
This is a record rather than a portfolio: it is everything we have finished in Parlin, not a selection from it. 1 of these customers wrote a review afterwards, and it appears here in their own words.
Parlin, NJ
Client since August 2014
Marcin from Parlin, NJ has been a Green Sun Energy Services client since August of 2014. He signed at the end of August and the generator was commissioned in the middle of December, a 16 kW Generac in a steel…
Great generator service and troubleshooting by Auston. Highly recommend the company.
Parlin, NJ
Client since October 2020
Joe and Beverly from Parlin, NJ have been Green Sun Energy Services clients since October of 2020. A Generac Guardian rated 16 kW went in the following July, running on natural gas behind a 200-amp automatic transfer switch, with 2,400…
Parlin, NJ
Client since October 2019
Carl in Parlin has been a Green Sun Energy Services client since October of 2019. Neither the generator nor the solar array on this property was installed by us, and both are now looked after by us, which is the…
Parlin, NJ
Client since August 2020
Rick from Parlin, NJ has been a Green Sun Energy Services client since August of 2020. The generator was commissioned that November: 20 kW on natural gas, on a 200-amp whole-house transfer switch, sized against an 18 kW calculation for…
Parlin, NJ
Client since May 2019
James from Parlin, NJ has been a Green Sun Energy Services client since May of 2019. His 8 kW Generac dates from 2012, and rather than replace a machine that still ran we retrofitted it with a new 100-amp automatic…
Residential standby generators are intended for backup during outages rather than as a permanent substitute for normal utility service. Running through an extended outage is expected, but maintenance requirements become considerably more important during prolonged continuous use.
The installation has to satisfy all applicable requirements. A manufacturer's listing cannot be ignored, and a manufacturer's minimum clearance does not cancel a municipal zoning requirement. Where requirements conflict or the interpretation is uncertain, the Authority Having Jurisdiction is consulted before the work goes in rather than after.
One that is listed for use as service equipment when installed in the appropriate configuration. These are commonly used for whole-house systems, where the transfer switch becomes part of the home's service arrangement rather than sitting downstream of it.
