18 kW and Three Bushes in Middletown, NJ

Middletown, NJ · Client since July 2021

Paul from Middletown, NJ has been a Green Sun Energy Services client since July of 2021. The generator was commissioned in February of 2022: 18 kW on natural gas, on a 200-amp managed whole-house switch, sized against a 14 kW calculation for the 2,800 square foot house. A refrigerator, a washer, a gas dryer and a dishwasher make up the load, so the machine carries a comfortable margin over what the calculation required. One condition was agreed before the work: three large bushes removed from the proposed generator position by the household. Annual maintenance, an extended parts-and-labor warranty and monitoring we manage all sit behind the machine.

Project Facts

Location
Middletown, NJ
Services
Standby Generator Installation, Standby Generator Service
Client since
July 2021
Manufacturer
Generac Model # 7228
Rated output
18 kW LP / 17 kW NG
Fuel
Natural Gas
Electrical service
200 amp
Transfer switch
200 amp
Load management
Managed Whole House

Standby generator questions from Middletown homeowners

Why do outages last longer on some Middletown streets than others?

Mature tree cover over overhead lines is the usual reason. Limbs coming down in wind, snow or ice take the lines with them, so heavily treed streets tend to see both more frequent outages and longer restoration times than open ones. It is one of the honest arguments for standby power rather than a portable generator.

How can a whole house be carried on a smaller electrical service?

Through load management. One or more large loads are controlled so they do not start at the same moment, or shut down briefly if generator demand climbs too high. That is what allows whole-house coverage where the raw sum of every connected load would otherwise exceed the machine.

Does new gas piping have to be pressure tested in Middletown?

Yes. Gas piping subject to the adopted fuel-gas code must be inspected and tested before it is accepted. New Jersey adopts the 2024 International Fuel Gas Code, which governs the inspection, the test pressure and how long the test has to hold.

Scroll to Top