Wilson from Holmdel, NJ has been a Green Sun Energy Services client since November of 2019. The generator was installed by another company and commissioned in April of 2013, and the servicing came to us six years later. Every interval since has been kept without a gap, from the six-year service in 2019 through the intervals that follow. Taking a machine on at six years is the middle case: the early services are behind it and the warranty is largely spent, so what matters is whether the record from that point forward is continuous – and here it has been. An annual maintenance plan covers the yearly visit.
Why Wilson chose Green Sun Energy Services
We keep your generator ready before the power goes out.
What makes Green Sun Energy Services different
- Standby generators: installed and serviced as a Generac Authorized Sales and Service Dealer, by factory-authorized Generac technicians. On this home: a standby generator serviced by Green Sun Energy Services.
- Local: locally owned and operated in New Jersey since 2010, NJHIC licensed (#13VH06229000), with 708 completed generator service projects across Monmouth County and 936 generator service projects throughout New Jersey.
Our work in Holmdel
Green Sun Energy Services has completed 42 generator service customers in Holmdel. Holmdel, a township in Monmouth County, is served by JCP&L.
Thinking about generator service for your Holmdel home? Tell us about your project here or call 732-410-7818.
Power it. Protect it. Maintain it.
Project Facts
- Location
- Holmdel, NJ
- Service
- Standby Generator Service
- Client since
- November 2019
- Manufacturer & model
- Generac 5887
- Rated output
- 20 kW LP / 18 kW NG
- Fuel
- Natural Gas
- Transfer switch
- 90 amp
- Load management
- Managed Whole House
Standby generator questions from Holmdel homeowners
Will a 20 kW generator run an entire Holmdel house?
For many homes, yes, but that does not mean every load can run at the same moment. Houses with two central air conditioners, electric heat, EV charging, pool equipment or electric cooking may need load management or a larger machine. The answer comes from a load calculation rather than from the phrase whole house.
How much room does a technician need around the machine?
Enough to satisfy the model-specific service clearances and to open the enclosure and remove service panels safely. Routine work reaches the engine, air filter, oil filter, spark plugs, battery, controller, fuel system and wiring compartments, so the space has to be real rather than nominal.
What should a Holmdel homeowner look for in a generator installer?
A contractor who can design, permit, install, commission, maintain and repair the whole system rather than one who sells the machine. That means generator sizing and transfer equipment, disconnect and shutdown requirements, grounding and bonding, the manufacturer's own installation requirements, gas or propane capacity and pressure, the model-specific clearances, the municipal zoning setbacks, windows and vents and carbon-monoxide entry points, flood requirements where they apply, permits and inspections, utility coordination, load management, commissioning, warranty registration, monitoring and long-term service. The lowest proposal is not necessarily the lowest cost over the life of the system.