Meet our featured client in Chesterfield

A power outage can strike any New Jersey home without warning, leaving your family without heat, refrigeration, or the medical or safety equipment you depend on. A standby generator solves that by starting automatically and running on natural gas or propane, keeping your home powered for as long as the outage lasts. If you have been thinking about whole-home generator installation in Chesterfield NJ, this page explains exactly what we offer and who stands behind it.

Green Sun Energy Services, LLC is locally owned and operated and based in Middletown, NJ. We have been in business since 2010 and are a certified Generac sales, installation, and service dealer. If you need a Generac dealer near Chesterfield NJ, we serve Burlington County. In 2024 we completed standby generator installation and standby generator service for one client in Chesterfield, and that client left a review of our work.

Chesterfield, NJ

Solar Panel Installation and Standby Generator Installation in Chesterfield, NJ | 15.18 kW and 22 kW

Client since July 2024

Joe from Chesterfield, NJ has been a Green Sun Energy Services client since July of 2024. A 22 kW standby generator and a 15.18 kW array were bought on the same day and finished six days apart that September.

Can't say enough nice things about Green Sun. They took care of every little detail, answered every silly question and arranged everything. Had a big solar array installed and a Generac. I got multiple quotes and whilst they weren't the lowest price they were very…

Joe2024Reviewed us onBBBYelp

Questions from Chesterfield homeowners

SolarShould the roof be replaced before the panels go on?

If the roof is near the end of its life, replacing it first is often the sensible order, because removing and reinstalling an array later adds labor and materials. The decision turns on roof age, shingle condition, any leaks, the decking, the remaining warranty and how long the solar system is expected to last.

SolarHow does an optimizer system differ from microinverters?

An optimizer system puts DC power optimizers at the modules and a single central inverter elsewhere; a microinverter system puts a small inverter at each module. Both can provide module-level monitoring and rapid shutdown when properly designed -- they are different architectures rather than one being the upgrade of the other.

SolarHow much does shade from mature Chesterfield trees affect production?

Shade can materially reduce production, particularly when it falls during the highest-production hours. Module-level electronics such as microinverters and optimizers reduce the effect of partial shading, but they cannot create sunlight where there is none. Significant shade should be modelled before any annual production figure is quoted.

Standby generatorWhat fuel does a home standby generator use?

Most residential air-cooled standby generators are designed to run on either natural gas or vapour-withdrawn liquid propane. The generator and its fuel system have to be configured for whichever is chosen, and the required pressure, capacity and consumption figures depend on the model.

Standby generatorHow far does a generator have to be from a window or door?

Manufacturer guidance requires substantial separation from operable windows, doors, vents and other openings through which exhaust could enter the house -- commonly five feet for the applicable air-cooled configurations. The exact model's current installation manual has to be checked before a location is approved.

EV chargingCan I install an EV charger myself in Chesterfield, NJ?

Homeowners may have limited rights to perform electrical work on property they own, but permitting, code compliance, inspection, and safety requirements still apply. Because EV charging is a continuous high-load application, professional installation by a qualified electrical contractor is strongly recommended.

EV chargingWhat circuit does a Tesla Wall Connector need?

At its maximum 48-amp output it normally needs a 60-amp circuit, because the code requires overcurrent protection for a continuous load to be at least 125 percent of it. Where the electrical system cannot support that, the Wall Connector can be commissioned lower and put on a correspondingly smaller circuit.

See every project we have completed →

Scroll to Top