Power outages can strike any New Jersey home without warning, leaving families without heat, refrigeration, or medical equipment for hours or days. A standby generator solves that problem by starting automatically the moment the grid goes down, protecting everything inside your home around the clock. If you are considering whole-home generator installation in Lebanon NJ, or need ongoing service and maintenance for a unit you already own, we are ready to help. We are also the Generac dealer near Lebanon NJ that homeowners in Hunterdon County can call for installation, service, and maintenance all in one place.
Green Sun Energy Services, LLC is locally owned and operated and based in Middletown, NJ. We have been in business since 2010 and are a certified Generac sales, installation, and service dealer. In Lebanon, we have completed standby generator service for one client in 2025. We offer Generac generator installation, service, and maintenance to homeowners in Lebanon, and we are here to answer your questions about equipment, scheduling, and the support options available to you.
Lebanon, NJ
Client since October 2025
Steve from Lebanon, NJ has been a Green Sun Energy Services client since October of 2025. The 20 kW Generac at the house was installed by another company in November of 2012 and had been running for thirteen years when…
No. The branch supplying the generator has to be sized for the flow and pressure the machine needs. A pipe that happens to be close by may be too small, or may already be carrying too much load. Undersized piping shows up as poor starting, unstable running, reduced output or a generator that shuts down under load.
The installation has to satisfy all applicable requirements. A manufacturer's listing cannot be ignored, and a manufacturer's minimum clearance does not cancel a municipal zoning requirement. Where requirements conflict or the interpretation is uncertain, the Authority Having Jurisdiction is consulted before the work goes in rather than after.
The grounding and bonding arrangement depends on the transfer-switch configuration, and in particular on whether the neutral is switched and the generator therefore treated as a separately derived system. It is designed by a qualified electrical contractor rather than assumed from another installation.
