Our completed projects in Bridgewater

Possibly. Existing propane equipment can be reused when it is correctly sized, sited, regulated, maintained and capable of supplying the demand the generator adds. The propane supplier should verify capacity and regulator performance before the machine is commissioned rather than after.

Most residential air-cooled standby generators are designed to run on either natural gas or vapour-withdrawn liquid propane. The generator and its fuel system have to be configured for whichever is chosen, and the required pressure, capacity and consumption figures depend on the model.

For the air-cooled models covered by the manufacturer's listed installation guidance, the rear of the generator can be as close as eighteen inches to a qualifying structure when every condition of that listing is met. That eighteen inches is a tested installation dimension, not a zoning setback, and a municipality can require more.

A microinverter is a small inverter installed at or near an individual module, so each panel converts on its own channel. That gives module-level visibility and limits the effect one underperforming panel has on the others around it.

They generally produce less annual energy in New Jersey than comparable south-facing panels, but they are not automatically unusable. Roof pitch, shading, the economics and the space available all matter, and a production model should show the expected output before north-facing modules go into a design.